RAVPower Prime 10000 Type-C - Come for the price, stay for the pouch
The RAVPower Prime 10000 Type-C is a slim power bank with USB-C. It’ll recharge most any model phone. But doesn’t support fast charging for most. Does offer dual input for faster recharging of itself.
- Charges all model phones
- Charges Switch while you play
- Fits in most Switch carrying cases
- Dual input for faster recharging of power bank
- Supports pass through charging
- Charge two devices at once
- Within FAA limits for lithium batteries and flights
- No fast charging except for iPhones
- Can’t be recharged by Nintendo Switch AC Adapter
- Doesn’t included a USB-C to USB-C cable
Disclosure: As an Amazon affiliate I earn from qualifying purchases. I purchased the product in this review.
No products found.
- Ports: USB-C x1, USB-A x1, micro-USB x1
- USB-C Output:
- 15W USB-C (5V/3A)
- Apple 2.4A
- USB-A Output:
- 12W USB (5V/2.4A)
- 15W USB-C (5V/3A)
- 10W micro-USB (5V/2A)
- Capacity: 10,000mAh | 38 Wh
- Size: 5.8 x 2.8 x 0.6 inches | 147 x 71 x 15 mm
- Weight: 7.2 oz | 206 grams
Learn more about Fast Charging.
Included In Box:
- RAVPower Prime 10000 Type-C
- micro-USB cable, 2.2 feet/0.66 meter
- USB-C to micro-USB adapter
- Nintendo Switch (handheld)
Estimated Number of Charges:
- iPhone 6/7/8: 3 charges
- iPhone Plus/X/XR: 2 charges
- Samsung Galaxy S8/S9: 2 charges
- Samsung Galaxy S10: 2 charges
- Nintendo Switch: 4.5+ hours of play
The RAVPower Prime 10000 Type-C is a slim design, 10,000mAh power bank. Similar shape and weight as a smartphone. Making it easy to hold it alongside your phone as it recharges. It can also fit in larger pockets, though I’m more comfortable with it in a bag.
While the power bank itself is nothing special the included pouch is nice. The main pocket fits the power bank with room to spare. You can get a couple of cables in there, too. There is a second, open pocket on one side. That fits earbuds or other small accessories. Or keep your cables separate from the power bank. One of the more useful pouches I’ve seen included with a power bank.
Compared To Similar Power Banks
|Charger||Apple 12W USB Power Adapter||Apple 30W USB-C Power Adapter||Nintendo Switch AC Adapter|
|ZMI PowerPlug Turbo
|Switch Speed Rating||Good||Great||Superb||Superb|
|Switch Safety Rating||Nintendo Suggested||Safe||Nintendo Licensed||Safe|
|Features||Travel Friendly||Travel Friendly||Supports Switch Dock||Supports Switch Dock
|Also Good For||Phone, Tablet||Phone, Tablet, Power Bank||Switch Only||Phone, Tablet, Power Bank, Laptop|
|1.75 x 1.75 x 1.1 inches|
|2.7 x 1.3 x 3.2 inches|
|2.6 x 2 x 1.4 inches|
|2.36 × 2.24 × 1.10 inches
Prices are from Amazon Product Advertising API, last updated on 2023-06-02.
You can see more USB-C power banks here.
Check with your device’s manufacturer to verify which charging standards it supports.
USB Power Delivery & Quick Charge 4+ Phones
- Apple iPhone 8/X/XR/XS
- Essential Phone
- Google Pixel
- LG ThinQ/V30
- Samsung Galaxy S8/S9/S10
- Samsung Galaxy Note 8/9
- Xiaomi Mi 8/9
- ZTE Axon Pro 9/10
Using an iPhone 8 for testing we get a reduced fast charging rate from the Apple 2.4A standard on the USB-C port. iPhones will need to use a USB-C to Lightning cable, not included. Charging on the USB-A port is at a slower, normal rate.
Android phones with USB PD will not experience fast charging. As USB PD isn’t supported, and Apple 2.4A is proprietary to Apple devices.
Quick Charge 3.0 Phones
- Samsung Galaxy
- Xiaomi Mi 5/6
Using a Moto G6 we confirm no fast charging support for LG, Motorola, or Quick Charge enabled Android phones. Both USB-C and USB-A ports provide ~10W, which is a normal charge.
The Nintendo Switch charges at the expected rate with a regular USB-C charger, up to 10W. That is 1-2W more than it uses while playing. So it will charge while you play. But slower than you’ve seen with its own charger.
Learn more about charging the Switch.
Dual Input & Output
An advertised feature of the RAVPower Prime 10000 Type-C is dual input. The portable charger connects to two USB chargers, drawing more power than from any one charger. In this case you use both the micro-USB port and USB-C port. The function does provide a faster charge. But only with a particular setup.
The trick is to use two USB-A power sources. One connects to the micro-USB port. You can use the included micro-USB cable. The other connects to the USB-C port. You can use the included micro-USB cable and USB-C to micro-USB adapter. Or a USB-C to USB-A cable. Either way you’ll need to provide a second cable for the setup. Once setup the portable charger draws from both sources, for a total greater than any one source. But dual input shuts down as you approach 100% full, continuing with only one port drawing power.
You cannot use a USB-C charger and maintain dual input. There is a limit on the circuits, so they cannot handle both USB-C and USB-A power sources.
Here are the options you’ll have for recharging the portable chargers. Ordered from fastest to slowest.
Two USB-A wall chargers with micro-USB and USB-C to USB-A cable
- One USB-C wall charger with USB-C to USB-C cable
- One USB-A wall charger with a USB-C to USB-A cable
- One USB-A wall charger with a micro-USB cable
For a portable charger with low output it supports dual output well. Using both the USB-C and USB-A ports I was able to draw up to 10W from both ports. Given my test devices only ever drew up to 10W using only one port I saw no performance hit from using both ports at once. Of course this would use up the limited capacity much faster. But If you needed to charge two devices at once you wouldn’t need to juggle them for the best performance.
Using the Included USB-C to micro-USB Adapter
As a general rule it is safe to use a USB-C to micro-USB adapter. That is an adapter that turns a micro-USB connection into a USB-C connection. That’s the type of adapter included with this charger’s micro-USB cable.
It is not safe to use the opposite, turning a USB-C connection into a micro-USB connection. That would allow for connections against the USB standards and dangerous to devices.
My USB tester showed the micro-USB cable with USB-C adapter includes a 56k Ohm resistor. That resistor is required under USB-C specs for all USB-C to USB-A cables.
The cable charged my Moto G6 at the same rate as a regular USB-C to USB-A cable.
Pass Through Charging
Pass through charging allows a portable charger to both recharge itself. And charge a connected device. The power received from the wall charger splits. Some to the portable charger’s own batteries. And some to the connected device. How it handles the split varies. And there are more inefficiencies than normal.
This portable charger supports pass through charging under these connections:
- Input: USB-C, Output: USB-A
- Input: micro-USB, Output: USB-C, USB-A
Pass through charging is useful when you only have one USB wall charger. But it is not recommended to use this feature on a regular basis. It puts more heat and stress on the portable charger. Which will affect its lifespan. It can also provide an inefficient charge to your device. Again, not great for its own battery’s lifespan.
If you like to have the option when traveling, fine. But don’t set this up next to your bed at home every night.
The RAVPower Prime 10000 Type-C is what I call a “regular USB-C” power bank. It supports 15W USB-C output. Not the higher outputs of USB Power Delivery. It doesn’t support fast charging outside of the iPhone. But that loss means a small cost savings, compared to similar power banks from the other big brands.
For iPhones it’ll charge at a good rate via USB-C. Thanks to its support of Apple 2.4A. But it isn’t as good as USB PD would be.
For other USB-C phones it’ll charge them at their normal rate. But no fast charging.
For the Nintendo Switch it charges in handheld mode while you play. It’ll be a slow charge with demanding games, but enough to keep up.
This “less powerful” model can charge two devices without losing output. Unlike some higher output USB-C PD models. USB-C PD power banks tend to drop their total output when two or more ports are connected. RAVPower’s power bank doesn’t take a performance loss. It was able to charge two USB-C devices up to 10W each at the same time. Some USB-C PD power banks drop to 10W total when two ports are in use.
Besides dual output it also supports dual input. Using two USB-A chargers and a couple of cables you can recharge the power bank faster. At 10,000mAh it doesn’t take all night to recharge. If you don’t have a USB-C wall charger this gives a faster alternative to keeping the power bank ready to go.
The included pouch is quite nice. Its main pocket fits the power bank and cables. And an open side pocket can carry small accessories. Or you can separate the cables from the power bank.
RAVPower has U.S. based support (web, email, phone) and an 18 month warranty. The warranty can be extended to 30 months if you register the product with RAVPower. They are a respected brand within the USB-C community.
The RAVPower Prime 10000 Type-C is a solid, no frills USB-C power bank for your smaller devices. Lack of fast charging saves you a few dollars. And the included pouch is nice for those anyone who keeps their gear organized.
Buy if you:
- Are okay with normal charging rates
- Need to charge two phones without any loss in performance
- Want a power bank you can easily hold against your phone
Don’t buy if you:
- Are looking for a fast charger
No products found.
You’ll want a USB-C wall charger to quickly recharge this USB-C power bank. I recommend the Anker PowerPort C 1. Or to use the dual input feature check out the RAVPower 24W Dual USB-C.
Be sure to check the Deals page to see if this or a similar charger is on sale.
Enjoyed this review? Sign up for the Switch Chargers newsletter and get updates on future reviews and Nintendo Switch related deals.